Z. Roth, B. Mooring, and B. Ravani, An overview of robot calibration, IEEE Journal on Robotics and Automation, vol.3, issue.5, pp.377-85, 1987.
DOI : 10.1109/JRA.1987.1087124

A. Elatta, L. Gen, F. Zhi, Y. Daoyuan, and L. Fei, An overview of robot calibration, Inform Technol J, vol.3, pp.74-82, 2004.

B. Mooring, Z. Roth, and M. Driels, Fundamentals of manipulator calibration, 1991.

A. Pashkevich, Computer-aided generation of complete irreducible models for robotic manipulators In: The third international conference of modellimg and simulation, pp.293-301, 2001.

A. Nubiola and I. Bonev, Absolute robot calibration with a single telescoping ballbar, Precision Engineering, vol.38, issue.3, pp.472-80, 2014.
DOI : 10.1016/j.precisioneng.2014.01.001

J. Santolaria, F. Brosed, J. Velázquez, and R. Jiménez, Self-alignment of on-board measurement sensors for robot kinematic calibration, Precision Engineering, vol.37, issue.3, pp.699-710, 2013.
DOI : 10.1016/j.precisioneng.2013.02.003

J. Hollerbach, A survey of kinematic calibration. The robotics review 1, pp.207-249, 1989.

S. Hayati, Robot arm geometric link parameter estimation, The 22nd IEEE Conference on Decision and Control, pp.1477-83, 1983.
DOI : 10.1109/CDC.1983.269783

H. Stone, Kinematic modeling, identification, and control of robotic manipulators, 1987.
DOI : 10.1007/978-1-4613-1999-3

H. Zhuang, Z. Roth, and F. Hamano, A complete and parametrically continuous kinematic model for robot manipulators, IEEE Transactions on Robotics and Automation, vol.8, issue.4, pp.451-63, 1992.
DOI : 10.1109/70.149944

Y. Chen, J. Gao, H. Deng, D. Zheng, X. Chen et al., Spatial statistical analysis and compensation of machining errors for complex surfaces, Precision Engineering, vol.37, issue.1, pp.203-215, 2013.
DOI : 10.1016/j.precisioneng.2012.08.003

A. Klimchik, A. Pashkevich, D. Chablat, and G. Hovland, Compliance error compensation technique for parallel robots composed of non-perfect serial chains, Robotics and Computer-Integrated Manufacturing, vol.29, issue.2, pp.385-93, 2013.
DOI : 10.1016/j.rcim.2012.09.008

URL : https://hal.archives-ouvertes.fr/hal-00756997

H. Shi, H. Su, N. Dagalakis, and J. Kramar, Kinematic modeling and calibration of a flexure based hexapod nanopositioner, Precision Engineering, vol.37, issue.1, pp.117-145, 2013.
DOI : 10.1016/j.precisioneng.2012.07.006

M. Ikits and J. Hollerbach, Kinematic calibration using a plane constraint Robotics and automation, 1997 proceedings, pp.3191-3197, 1997.
DOI : 10.1109/robot.1997.606774

URL : http://www.cs.utah.edu/~jmh/Ikits97.ps

C. Mirman and K. Gupta, Compensation of Robot joint variables using special Jacobian matrices, Journal of Robotic Systems, vol.8, issue.4, pp.113-150, 1992.
DOI : 10.1109/JRA.1986.1087054

M. Slamani, A. Nubiola, and I. Bonev, Modeling and assessment of the backlash error of an industrial robot, Robotica, vol.30, issue.07, pp.1167-75, 2012.
DOI : 10.1017/S0263574710000056

Y. Sun and J. Hollerbach, Observability index selection for robot calibration, 2008 IEEE International Conference on Robotics and Automation, pp.831-837, 2008.
DOI : 10.1109/ROBOT.2008.4543308

URL : http://rpal.cse.usf.edu/%7Eyusun/lab_pub/icra0801.pdf

Y. Sun and J. Hollerbach, Active robot calibration algorithm Robotics and automation, ICRA, pp.1276-81, 2008.

J. Hollerbach, W. Khalil, and M. Gautier, Model identification, Springer handbook of robotics, pp.321-365, 2008.

H. Zhuang, J. Wu, and W. Huang, Optimal planning of robot calibration experiments by genetic algorithms, Robotics and automation 1996. Proceedings, pp.981-987, 1996.
DOI : 10.1002/(SICI)1097-4563(199710)14:10<741::AID-ROB4>3.0.CO;2-U

D. Daney, Y. Papegay, and M. B. , Choosing Measurement Poses for Robot Calibration with the Local Convergence Method and Tabu Search, The International Journal of Robotics Research, vol.24, issue.6, pp.501-519, 2005.
DOI : 10.1002/(SICI)1097-4563(199807)15:7<395::AID-ROB2>3.0.CO;2-H

URL : https://hal.archives-ouvertes.fr/hal-00907749

A. Atkinson and A. Donev, Optimum experimental designs Oxford statistical science series, 1992.

J. Borm and C. Menq, Determination of Optimal Measurement Configurations for Robot Calibration Based on Observability Measure, The International Journal of Robotics Research, vol.10, issue.1, pp.51-63, 1991.
DOI : 10.1109/JRA.1987.1087124

W. Khalil, M. Gautier, and C. Enguehard, Identifiable Parameters and Optimum Configurations for Robots Calibration, Robotica, vol.108, issue.01, pp.63-70, 1991.
DOI : 10.1109/JRA.1987.1087124

D. Daney, Optimal measurement configurations for Gough platform calibration Robotics and automation, 2002 proceedings ICRA'02, pp.147-52, 2002.
DOI : 10.1109/robot.2002.1013353

A. Nahvi and J. Hollerbach, The noise amplification index for optimal pose selection in robot calibration, Proceedings of IEEE International Conference on Robotics and Automation, pp.647-54, 1996.
DOI : 10.1109/ROBOT.1996.503848

URL : http://www.cs.utah.edu/~jmh/Papers/Nahvi_ICRA96.pdf

A. Klimchik, Y. Wu, S. Caro, and A. Pashkevich, Design of experiments for calibration of planar anthropomorphic manipulators, 2011 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), pp.576-81, 2011.
DOI : 10.1109/AIM.2011.6027017

URL : https://hal.archives-ouvertes.fr/hal-00759855

H. Zhuang, K. Wang, and Z. Roth, Optimal selection of measurement configurations for robot calibration using simulated annealing, Robotics and automation , 1994 proceedings, pp.393-401, 1994.

J. Imoto, Y. Takeda, H. Saito, and K. Ichiryu, Optimal Kinematic Calibration of Robots Based on Maximum Positioning-Error Estimation (Theory and Application to a Parallel-Mechanism Pipe Bender), pp.133-173, 2009.
DOI : 10.1007/978-3-642-01947-0_17

A. Klimchik, Y. Wu, A. Pashkevich, S. Caro, and B. Furet, Optimal Selection of Measurement Configurations for Stiffness Model Calibration of Anthropomorphic Manipulators, Applied Mechanics and Materials, vol.162, pp.161-70, 2012.
DOI : 10.4028/www.scientific.net/AMM.162.161

URL : https://hal.archives-ouvertes.fr/hal-00756893

R. Bernhardt and S. Albright, Robot calibration. United Kingdom: Chapman and Hall, 1993.

Q. Le and A. Ng, Joint calibration of multiple sensors, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.3651-3659, 2009.
DOI : 10.1109/IROS.2009.5354272

URL : http://www.robotics.stanford.edu/~ang/papers/iros09-JointCalibrationMultipleSensors.pdf

L. Beyer and J. Wulfsberg, Practical robot calibration with ROSY, Robotica, vol.22, issue.5, pp.505-517, 2004.
DOI : 10.1017/S026357470400027X

Y. Liu, Z. Jiang, H. Liu, and W. Xu, Geometric Parameter Identification of a 6-DOF Space Robot Using a Laser-Ranger, Journal of Robotics, vol.3, issue.6, 2012.
DOI : 10.1109/TMECH.2011.2158234

URL : http://downloads.hindawi.com/journals/jr/2012/587407.pdf

I. Park, B. Lee, S. Cho, Y. Hong, and J. Kim, Laser-Based Kinematic Calibration of Robot Manipulator Using Differential Kinematics, IEEE/ASME Transactions on Mechatronics, vol.17, issue.6, pp.1059-67, 2012.
DOI : 10.1109/TMECH.2011.2158234

J. Liu, Y. Zhang, and Z. Li, Improving the Positioning Accuracy of a Neurosurgical Robot System, IEEE/ASME Transactions on Mechatronics, vol.12, issue.5, pp.527-560, 2007.
DOI : 10.1109/TMECH.2007.905694

J. Santolaria, J. Aguilar, J. Yagüe, and J. Pastor, Kinematic parameter estimation technique for calibration and repeatability improvement of articulated arm coordinate measuring machines, Precision Engineering, vol.32, issue.4, pp.251-68, 2008.
DOI : 10.1016/j.precisioneng.2007.09.002

C. Lightcap, S. Hamner, T. Schmitz, and S. Banks, Improved Positioning Accuracy of the PA10-6CE Robot with Geometric and Flexibility Calibration, IEEE Transactions on Robotics, vol.24, issue.2, pp.452-458, 2008.
DOI : 10.1109/TRO.2007.914003

J. Santolaria, J. Conte, and M. Ginés, Laser tracker-based kinematic parameter calibration of industrial robots by improved CPA method and active retroreflector, The International Journal of Advanced Manufacturing Technology, vol.31, issue.1
DOI : 10.1016/S0010-4485(98)00076-1

I. Williams, G. Hovland, and T. Brogardh, Kinematic error calibration of the gantrytau parallel manipulator, pp.4199-204, 2006.
DOI : 10.1109/robot.2006.1642348

F. Gantmakher, The theory of matrices, 1959.

A. Joubair and I. Bonev, Comparison of the efficiency of five observability indices for robot calibration, Mechanism and Machine Theory, vol.70, pp.254-65, 2013.
DOI : 10.1016/j.mechmachtheory.2013.07.015

A. Klimchik, A. Pashkevich, Y. Wu, S. Caro, and B. Furet, Optimal Selection of Measurement Configurations for Stiffness Model Calibration of Anthropomorphic Manipulators, Applied Mechanics and Materials, vol.162, pp.161-70, 2012.
DOI : 10.4028/www.scientific.net/AMM.162.161

URL : https://hal.archives-ouvertes.fr/hal-00756893

C. Dumas, S. Caro, S. Garnier, and B. Furet, Joint stiffness identification of six-revolute industrial serial robots, Robotics and Computer-Integrated Manufacturing, vol.27, issue.4, pp.881-889, 2011.
DOI : 10.1016/j.rcim.2011.02.003

URL : https://hal.archives-ouvertes.fr/hal-00632989